| Machine speed |
Up to 130 cpm, single jaw. Higher speeds with multiple jaws
Production output dependent upon product, film and machine specifications. |
| Product dimensions |
| length |
50/550 mm - 2/21.6” with any jaw centres and length |
| width |
20/230 mm - 0.8/9” with jaw length 250 mm - 9.8”
20/300 mm - 0.8/11.8” with jaw length 325 mm - 12.8” |
| height |
Up to 90 mm - 3.5” with jaw centre 150 mm - 5.9”
Up to 120 mm - 4.7” with jaw centre 180 mm - 7.1” |
| Film cut-off |
Up to 630 mm - 24.8"
Cut-off defined as: product length + height + 40 mm (1.6”), depending on product characteristics. |
| Wrapping materials |
| Suitable heat-sealable films, such as plain, or co-extruded polypropylene (PP), laminate films (e.g. OPP+PE), polythene films (PE) as well as cold-sealable films of suitable quality |
| Film reel dimensions |
| core Ø |
76 mm - 3” |
| outer Ø |
350 mm - 13.8” |
| width |
650 mm - 25.6” |
| Film reel max weight |
| 40 kg - 88 lbs |
| Electronic platform |
| Industrial PC |
| Power requirement |
| From 220 to 480 V, 50/60 Hz, 3-phase, 5 kVA |
| Compressed air |
| 6 bar, 1 l/min with air gusseting |
| Machine weight |
| 900 kg - 1984 lbs |
|
| PC-controlled HFFS machine with rotary sealing jaws. |
| Multi-axis drive technology with 3 independent drive circuits, consisting of an AC motor controlled by a frequency inverter, for product infeed, sealing rollers and rotary sealing jaws. |
| A simple-to-use operator interface allows quick product change-over. |
| 64 program memory; two-level password protection security. |
| Automatic adjustment of film-pull, infeed and sealing parameters during product or program change. |
| Precision temperature control circuits ensure seal strength and quality. |
| No product/No bag. |
| Misplaced product detection system. |
| Single piece transparent guarding with safety interlock. |
| Robust mechanical construction with welded sheet metal main body, epoxy powder coating or (opt.) stainless-steel finishing. |
| Hygienic design with cantilevered body and infeed, for easy clean down. |
| Single film reel mounting with self-centering cones, right hand machine version, 2 m long infeed, standard. |
| In-line and right-angle types of automatic feeders available on request. |
 |
| Please discuss your needs with our local representative to configure this machine to your product's specific requirements. |
| ILAPAK is ISO 9001:2000 certified. |
|
